Fishing Reel Maintenance is an important process to ensure that you can keep your fishing reel for a long time. There are a few things that you need to do in term of proper maintaining. For example, you need to know how to clean your fishing reel with correct steps, apply oil to your reel frequently and store it in a cool place.
If you are looking for the ultimate guide on Fishing Reel Maintenance, this article is for you. Read on to learn how to keep it in good condition and clean it properly.
Tips on Fishing Reel Maintenance
The main parts of a fishing reel include a roller, a handle, a reel and many other parts according to different types of a fishing reel. When you clean a fishing reel, you need to take out all of the parts for a proper cleaning.
Always read the manual and instructions that come along with the fishing rod and reel for information and guide on how to clean them.
You should clean your fishing reel right after you go back from a fishing trip to get rid of the dirt, salt, and water from both internal and external parts.
Lubricating your fishing reel on a regular basis also helps the mechanism of a fishing reel run smoothly, enhancing your casting and luring activities. However, you should also apply enough oil according to the instructions only. Over lubrication can lead to clogging and hence prevent the reel from running smoothly.
Finally, when you store your fishing reel and the rod, remember to put them in a closet which is dry and have a constant room temperature. If it is too humid, the quality of the fishing line will be damaged. You should also store them in a dark place away from the sun light as well as the UV lights can cause significant damages to the shelf life of the fishing line and the reel as well.
Moving to the next part, I will discuss in more details about how you should clean your fishing reel. Different types of the fishing reel will have different ways to clean. Find the type of your fishing reel below for more information:
If your fishing reel is dirty or when you want to use it after a long time putting it in the storage, the first thing you need to do is clean and give it a good lubrication so it can work smoothly again.
Here are all of the items you would need for fishing reel cleaning: reel lubricant, a brush-ideally a bristle small sized type or an old toothbrush, a clean towel, some cotton swabs and a bucket full of soapy water.
Here are the steps to clean your baitcasting reel:
Step 1: First you need to open the spool by pushing a button, normally located near the lower left-hand side of the reel. Lightly wash off the reel with water using a wet towel or a spray bottle.
Step 2: Then you need to use the small sized brush to clean off all of the dirt, debris, and salt that are stuck to the exterior parts of the baitcasting reel. If the dirt is hard to be scrapped off, you can add some drops of isopropyl rubbing alcohol onto those particles of dirt.
Step 3: Use some small cotton swabs to clean the interior parts including the pinion gear and the brake collars, spool shaft and spool bearing.
Step 4: Apply lubricant to spool bearing, the level wind system and the brake case. Be careful not to drop lubricating oil onto the spool shaft as clog will form there and affect the performance of the reel adversely.
Follow these steps below to clean your conventional reel:
Step 1: In the first step, you need to use a screwdriver to take off the left side plate of your conventional reel and then remove all parts of it.
Step 2: Apply lubricant onto the drive shaft bearing as well as spool bearing and brake collar. Like when you clean the baitcasting reel, avoid lubricating spool shaft as it will then hinder the free movement of your fishing reel.
Step 3: In the next step, you need to use a cotton swab or a small brush to clean dirt and debris off the exterior parts of the reel. In case these pieces of dirt are stubborn, you can use isopropyl alcohol or soapy water to rub these areas. After that, clean off all parts of the reel with soapy water.
Step 4: Investigate the left side plate of the spool bearing for any sign of corrosion and then apply a thin coat of lubricant onto the plate.
Round Baitcasting Reels
Cleaning your round baitcasting reel with these following steps:
#1: Before you clean around baitcasting reel, remove all parts of the reel by using a thumbscrew.
# 2: After that, use a brush or a cotton swab soaked in soapy water. Then, clean off the exterior parts of the fishing reel and the level wind system as well.
#3: You need to check for signs of corrosion. Also check the rust in the level wind, the spool shaft bearing and the collar and the O-ring. If these parts are severely corroded, you need to replace them as soon as possible.
#4: Finally, you need to apply lubricant onto the level wind, the spool shaft bearing. You should not use too much lubricant on the spool bearing. Why? Because it will cause significant damage to the drag system.
Now let’s start doing the spinning Fishing Reel Maintenance:
Step 1: You need to get rid of any bit of dirt left on the spinning reel by soaking a clean towel to the soapy water. And then rub the reel carefully. The spool of the spinning reel is the part which dirt is more stubborn. Also, it tends to stick there. So, pay close attention when you clean to this part. You also need to clean the inside of the reel as well.
Step 2: Wash the towel with running water to get rid of the excessive soap on it. Also, use it to clean the spinning reel one more time. After that, use a dry towel to dry off the spinning reel.
Step 3: With the small brush, you need to brush off any remaining dirt from the bail of the reel and the line roller. If the dirt is sticky, you should apply more pressure in a circular motion.
Step 4: Take the spool out of the fishing reel and clean it off. Make sure it is completely dry.
Step 5: In this final step, you need to apply lubricating oil to the spool. The entire reel and all of the interior moving parts.
Trolling Reels- Two Speed and Single Speed
Here are the steps you should follow to do the trolling Fishing Reel Maintenance:
Step 1: To begin cleaning your trolling reel, you need to remove the dial, the spring and the drag control lever. In case you use two-speed reels, you need to remove the push button shield and the slide plate. On the other hand, take out the handle bolt screw and the handle screw in the single speed reel.
Step 2: In the next step, you need to clean the exterior frame of the trolling fishing reel. Use a damp cotton swab or a small brush.
Step 3: Moving on, you need to clean the spool bearings before applying one drop of lubricant on them. You should do the same thing with the pinion gear.
Step 4: Reinstall every part into the original place.
Tips to help you do Fishing Reel Maintenance safely and properly
- Use lubricant or any other chemical to clean the fishing reel? Then you need to read the label of the product carefully. Also, you should follow all of the directions and safety cautions of the product.
- Only use oil which is specifically made to lubricate a fishing reel. Some kinds of oil such as cooking oil are too watery. Some mineral oils will corrode the rubber parts and the plastic part of the fishing reel.
- Wear gloves when you clean the reel and avoid getting these types of chemicals into your eyes.
- Start to take out all the parts of a fishing reel for cleaning? Well, you should prepare a clean working station to put all of those parts onto it. This will help to prevent you from losing any part of the reel during the cleaning process.
As you can see, different types of the fishing reel will need different ways of cleaning. However, how to do Fishing Reel Maintenance are not difficult at all. All you need is some small amount of time and some few steps. Remember to apply lubricating oil to any moving part of your fishing reel to ensure everything goes smoothly. Hence your cast will be more precise. And, you will be able to catch fish while having a lot of fun and enjoyable times.
You should often do the Fishing Reel Maintenance. Thus, those Fishing Reel will be able to last for a very long time and deliver the best performance. So spend some of your free time now and start doing Fishing Reel Maintenance before it is too late.